Seznam norem pro zkoušení

Seznam norem, které splňují přístroje od firmy Hegewald & Peschke :

  • Syringe Test
  • Plunger Force Test
  • Tissue Test
  • Adhesive Strength Packaging
  • Tissue Adhesive
  • Needle Insertion
  • Tubing
  • Stent Dislodgement
  • Catheters
  • ASTM F88 – Seal Strength
  • ASTM F382 – Metalic Bone Plates
  • ASTM F451 – Bone Cement Strength
  • ASTM F564 – Metallic Bone Staples
  • ASTM F1828 – Ureteral Stents
  • ASTM F1839 – Foam Devices
  • ASTM F1874 – Sutures Bend Test
  • ASTM F2009 – Dissassembly Force Taper Connects
  • ASTM F2079 – Stents Tensile Strength
  • ASTM F2132 – Puncture Resistance
  • ASTM F2183 – Punch Testing
  • ASTM F2255 – Lap Shear Testing
  • ASTM F2256 – Tissue Adhesives
  • ASTM F2258 – Tissue Adhesives
  • ASTM F2392 – Burst Strength Sealant
  • ASTM F2458 – Closure Strength
  • ASTM F2477 – Stents Strength
  • ASTM F2502 – Plates & Screws
  • ASTM F2516 – Tensile Nitinol Wire
  • ASTM F2606 – Bend Vascular Stent
  • ASTM D6319 – Medical Gloves
  • BS EN 455-2 – Medical Gloves
  • ISO 7886-1 – Hypodermic Syringe
  • ISO 14879 – Tibial Trays
  • ISO 11193 – Medical Glove
  • T-Peel
  • 90° Peel
  • 180° Peel
  • Solder Paste Tackiness
  • ASTM F1140 – Burst Strength
  • ASTM D2659 – Top Load
  • ASTM F88 – Seal Strength
  • EN 868-5 – Seal Strength Pouches
  • ASTM C633 -Adhesion Spray Coating
  • ASTM D1335 – Tuft Binding Floor Covering
  • ASTM D903 – Adhesive Bond
  • ASTM D1876 – Peel Resistance
  • ISO 36 – Rubber Adhesion
  • ISO 2411 – Adhesion Plastic
  • ISO 4587 – Lap Shear Strength
  • ISO 11339 – Flexible Bond Assembly
  • EN 1465 – Lap Shear Strength
  • EN 1719 – Tack Measurement
  • EN 1939 – Peel Adhesion
  • FINAT Test Method 2 – 90° Peel
  • Compress (Load/Extension)
  • Compress (Stress/Strain)
  • Indentation (Load/Extension)
  • Indentation (Stress/Strain)
  • Spring Rate
  • Spring Force
  • Spring Height
  • Compression Test
  • Tensile Test
  • Tensile Strength
  • ASTM D3039 – Tensile Carbon Fiber
  • ASTM D3846 – Shear Strength
  • ASTM D7269 – Aramid Cords
  • ASTM D6484 – Compressive Strength
  • ASTM D1055 – Flex Resistance
  • ASTM D3574 – Indention Deflection
  • ASTM D3574 – Foam Deflection
  • EN 14509 – Shear Strength
  • ISO 527-4 – Tensile Isotropic/Orthotropic
  • ISO 14125 – Flexural Properties
  • ISO 14126 – In-plane Compression
  • TAPPI – 404 – Tensile Break Strength
  • TAPPI 220 – Burst Strength
  • TAPPI 456 – Wet Paper Strength
  • TAPPI 457 – Pull to Rupture
  • TAPPI 494 – Tensile Energy Absorbing

Naši nejvýznamnější dodavatelé